Here is a user share of Lexia Diagbox v8.38 and earlier versions to diagbox v8.17, intended for personal, educational and experimental use.

Lexia-3 lexia3 V48 PP2000 V25 with Diagbox V7.83 Software for Peugeot and Citroen Support 307/C5 Recommend SP08-C1. PP2000/Lexia-3 Interface works for both Citroen and Peugeot. It compatible with most of Citroen and Peugeot cars from 1995. Lexia-3 support read identification,read fault codes,clear fault codes,auto-scan etc. Lexia-3 DIAGBOX 6.24 software LEXIA-3 Diagbox 7.24 Software. LEXIA-3 SOFTWARE PP200 Lexia-3 software is very large,only CD send,sorry. Lexia-3 Setup Instruction PP2000 is the Software for Peugeot! Click ‘InstPC’ to install. LEXIA3 is the Software for Citroen! Click ‘Instlex3’ to install.

Diyobd2 & the contributor @Simple hold no responsibility for any illegal or improper usage. Carry out this procedure at your own risk.

DiagBox download:

DiagBox APP folder (Lexia nad PP2000) update from 8.17 to 8.37APP_Update_817-837.exe 75.2 MB Password = Simple https://mega.nz/#!Z0EHmRwB!T4QsYzZxrNiatSoRlacjCw7oghPpb0H200MO03BM2jgDiagBox APP folder (Lexia nad PP2000) update from 8.35 to 8.37APP_Update_835-837.exe 10.2 MB Password = Simple https://mega.nz/#!F0dCSbLA!Aqr6lKJy2rQlkK0_8kBLCVMJKo_6IaJjWmPMPu0fkBkIncludes updates 8.37 + 8.38 for installations with 8.35 or higher. It will update Lexia and PP2000 to v500.74 & v600.80 respectively.APP_Update_835-838.exe 39.4 MB Password = Simple https://mega.nz/#!V8VS1Yib!p3MCZCzs8j7ruts2gAJtUPsJTflRIlTr8ZiXNKhTj1c

Note: about diagbox security

all diagbox above is not tested yet so that users use them with unknown security;

For sake of security, kind of old Diagbox versions are advised:

Diagbox v7.76 -100% working

PSA diagbox v7.57- tested by thousands of users, 100% safe

Note: about diagbox download
I present 2 compilations “APP_Update_817-837.EXE” and “APP_Update_835-837.EXE” (links in the attachment). Those executables are intended to update Lexia 3 and PP2000 from version 8.17+ or 8.35 respectively, to the latest 8.37 and will bring Lexia v500.74 and PP2000 v600.79 to latest fixes or support level.

APP_Update_817-837.EXE update should be attempted if you have a working DiagBox v8.17 / v7.81 installation or higher, or if you have a working “APP-835.7z” implementation.

APP_Update_835-837.EXE update should be attempted if you have a working “APP-835.7z” implementation.

APP_Update_835-838.EXE should be attempted if you have a working “APP-835.7z” implementation or APP-8.37 upgrade. It will update Lexia and PP2000 to versions 500.74 and 600.80 respectively, with latest fixes and support level.

Procedure:
1- Ensure you have a backup copy of the file “C:AWRootbinfiAPPDIAG.SYS” before you start.
2- Download and execute the appropriate file for your own setup. The process will copy all necessary files to the updt folder, it will then automatically kill all associated processes to enable overwriting without conflicts.
3- Run DiagBox to start the update process and wait until DiagBox is operational. Close DiagBox and restart your computer to ensure all processes are running.

Done..! you may run DiagBox software as usual..

Have fun!

Lexia language is set to English and PP2000 to french, if you wish to change them, edit the DICO.TXT file in the EXE folders of LEXIA or OUTILREP (PP2000) and replace “GB” with “FR” or vise versa.

P.S. DiagBox has been running on Firmware 4.3.4 since 7.66/8.02.

BIG THANKS to Simple.

It is from lexia3 pp2000 technical support:Lexia 3 PSA Diagbox v8.38 Download in Mega

Look here: PSA Diagbox 9.12 software for LEXIA 3 cable

Part 1: Diagbox 9.12 download

Part 2: Diagbox 9.12 install

Part 3: Diagbox error 0: diagbox 7.83 solved!

In detail…

Part 1: Diagbox 9.12 Download Free

Latest version: Diagbox_setup_v09.12.exe:

Diagbox v09.12 original and unchanged.
maybe of use to someone for personal research and development.
it is offered as is and with no support from myself.

Tested version: Diagbox v7.83 tested ok with Lexia 3 clone

HW & SW requirements：

Intel Celeron/Pentium III 400 MHz,

128 MB RAM,

50MB free HDD space

USB 1.1 port (USB 2.0 recommended)

Microsoft Windows 98 SR2/2000/XP with the latest service pack installed; Windows?XP?system better.

Please setup the software according to the requirements to hardware and software. Otherwise it will fail to setup and bring you much trouble.

Part 2: Diagbox 9.12 Install

Beforehand, plug your computer to the mains power supply and check that you have an internet connection. è

DiagBox will remain usable at the same time as the download of the installer (may take some time depending on your internet bandwidth).

Note: If you try to download Diagbox again, you will see the following error message

Step 2: Once the Digagbox download is complete, return to the desktop, double-click on the file named « DiagBox_setup_V09.12.exe »

First, close DiagBox, plug your computer to the mains power supply, check that you have an internet connection.

Select your language if necessary in the first step. After that, an intermediate validation message is displayed. Click on “Install” button:

Lexia Cars

Please wait until the end of the installation. About 30 min to perform all installations.

Depending on the options subscribed, after the activation procedure using your RRDI code, more steps will be necessary.

Part 3: Diagbox Error 0

Diagbox Error “0” is due to no network card detected.

You must activate the network card ; that is, you have to disconnect the wifi then connect the internet cable of your box rj45 to the computer then you will be able to activate diagbox (to be activated diagarious of scari01 a besoing of a connection to the computer by cable network no wifi) A faith activate you will be able to finish the installation is possible to use diagbox even without

To avoid Diagbox software activation error and Windows XP installation issues, you’d better spend a bit on a crackbut tested versionDiagbox 7.83: , cost $9.99 only. Installed on XP system and works good.

Diagbox running on PSA Lexia cable is used for fault codes read and write, programming and enabling hidden functions, ECU reset, actuator test, auto- scanning…

In this video you will learn how to use diagbox, learn how to read faults, how to clear faults, how to read learnings keys , how to read all settings, how to reset oil gauge, reset maintenance gauge, read oil temperature, read gear values, test all parts of your car, change the driver settings, know what is the programmed settings, watch the whole video to know all the menus of the diagbox, you can move from one window to others, easy and fast. know how many remote key programmed to work with PSA cars

Diagbox 7.83 vehicle coverage:

Peugeot: 107, 206, 207, 307, 308, RCZ, 407, 508, 607, 1007, 3008, 4007, 5008, BIPPER, PARTNER, EXPERT, BOXER, 106, 205, 306, 309, 405, 406, 605, 806, 807 etc.

Citroen: C1, C2, C3 DS3, C4, DS4, C5, C6, C8, C-CROSSER, NERO, BERLINGO, JUMPY, AX, SAXO, BX, ZX, XSARA, XANTIA, XM, EVASION, C15, C-ZERO etc.

Diagbox 7.83 review:

Lexia 3 Download Vmware

Review 1:

Took hours and hours to install the software, but afterwards it all works well. Read a few forums regarding the correct version of the software to install, you only need to go up to a certain point – after that the software gets more difficult to get to work properly. I use it on a 2012 DS3 to recalibrate the steering sensor and it works a treat.

Review 2:

Lexia 3 Free Download

This is an older version and you have to reali